Skip to content

The record · campaigns, screenings, releases

The History

Every campaign, screening, release and collectible that carried the mask from the original film to the People's Premiere — dated, sourced, and in order.

You were never just an audience. You were the reason there was a sequel to organize.

You made it happen · 2026

Funded by fans. Built by Vernonites.

Our Behind the Mask II Kickstarter was a success — because this community showed up. You helped bring The Return of Leslie Vernon to life. Thank you for believing in the next chapter.

Missed the campaign? Visit Kickstarter for late pledges, or revisit the campaign that helped make the return possible. It belongs in the history of The LVU.

Late pledges & campaign

Behind the Mask II: The Return of Leslie Vernon

$400,710

pledged to help bring this project to life

1,450

backers

Funding Successful

The campaign reached its goal — the sequel exists because this community showed up.

Last updatedOctober 3, 2026

From the archives · December 3, 2021

Six issues, one volume

When the six-issue series sold out, we collected the whole run into a single omnibus edition. Pre-orders opened December 3, 2021 — with copies set to arrive by Christmas — a first printing of 237 copies at $75, each one signed and numbered by Director Scott Glosserman.

237

first printing

$75

pre-order price

Signed & numbered

every copy, by Director Scott Glosserman

Nothing on this page is for sale — this block is a record of the first printing, not a shop.

From the archives · April 2019

The mask, on a T-shirt

In April 2019, Fright-Rags came back to the original film with a full collection: four T-shirts, an enamel pin and a run of trading cards.

T-Shirts
Four distinct designs by artist Kyle Crawford, retailing for $28 each.
Enamel Pins
A collectible flip-open enamel pin featuring artwork inspired by the film.
Trading Cards
The film also turned up in Fright-Rags's Fright Facts Trading Cards (Series 4), packaged in wax-wrappers with classic chip-back stock.

These runs are long gone — this block is a record of how far the mask travelled, not a shop.

From the archives · March 27, 2018

Scream Factory's Collector's Edition

A year after the anniversary screening, Scream Factory gave the original film its collector's treatment: a Collector's Edition Blu-ray released on March 27, 2018, built on a new HD master derived from a 2K intermediate.

Two commentaries
The set includes an audio commentary with co-writer/director Scott Glosserman, moderated by filmmakers Adam Green and Joe Lynch, plus an audio commentary with actor Nathan Baesel and other crew members.
New interviews
And new retrospective interviews with actors Angela Goethals, Ben Pace, and co-writer/co-producer David Stieve.

Sourced to Leslie Vernon Rises in Scream Factory's Upcoming Behind the Mask Blu-ray · Dead Entertainment · by Ray Morse · February 9, 2018

The Shudder wordmark

From the archives · January 26, 2018

The mask goes subscription

The original film found a streaming home with Shudder — the same year it received its Collector's Edition Blu-ray.

Effective date
January 26, 2018
Licensed use
Subscription video-on-demand (SVOD)

This band records the 2018 license — it says nothing about what the service is streaming today.

From the archives · March 2017

The screenplay becomes a comic series

Fresh off the 10th-anniversary screening, we took the original screenplay to Indiegogo and turned it into Before the Mask: The Return of Leslie Vernon — a 6-issue series with Glen Echo Entertainment.

Before the Mask: The Return of Leslie Vernon · comic series

$20,929

raised by 298 backers · 346 followers

Pledge manager closed

No new pledges can be added — the campaign has run its course.

Before the Mask: The Return of Leslie Vernon — issue 1 of 6
Issue 1
Before the Mask: The Return of Leslie Vernon — issue 2 of 6
Issue 2
Before the Mask: The Return of Leslie Vernon — issue 3 of 6
Issue 3
Before the Mask: The Return of Leslie Vernon — issue 4 of 6
Issue 4
Before the Mask: The Return of Leslie Vernon — issue 5 of 6
Issue 5
Before the Mask: The Return of Leslie Vernon — issue 6 of 6
Issue 6

Glen Echo Entertainment

Anniversary poster for Behind the Mask: The Rise of Leslie Vernon, showing the masked figure holding a scythe, labelled 10th Anniversary Edition

From the archives · SXSW 2017

The 10th anniversary, on 35mm

When SXSW brought the original back for its 10th anniversary, the festival's senior film programmer made the case for it in print.

Neece and team have brought back one of the most beloved SXSW Midnight movies of all time: 2006’s ingenious meta-horror Behind the Mask: The Rise of Leslie Vernon. Neece said, “When they wanted to bring it back, and they had a 35mm print, we were like, ‘Yes, no-brainer.’”

The Austin Chronicle

SXSW Unleashes the Midnighters · by Richard Whittaker · February 7, 2017

The quoted programmer is Jarod Neece, SXSW's senior film programmer.

From the archives · December 2012

Leslie Vernon, seven inches tall

A Rhode Island toy company — DeConte Figures & Collectibles — sent out its first licensed line: a 7-inch action figure of the slasher Leslie, played by Nathan Baesel, alongside limited edition reproductions of the mask and scythe props from the movie.

Signed editions
Each was limited to 100 and signed by Director Scott Glosserman, Actor Nathan Baesel and Sculptor Neal DeConte.
The mask
Molded from the last surviving mask from the movie. Cast in high-quality hard urethane, all hand painted, with duplicated foam sections on the inside, head straps and hair attached. Made in the USA.
The case
Only 100 produced, each with a certificate of authenticity, in an acrylic-faced, finished hardwood display case measuring 10.5″ wide by 14.5″ tall, with red velvet on the inner back wall. A brass plaque signed by Scott Glosserman and Nathan Baesel.
The price
The mask ran $600 plus shipping & handling.
Where the money went
A percentage of all sales went back to Glen Echo Entertainment to help fund the second Behind the Mask movie.
Bloody Disgusting · Brad Miska · December 21, 2012
The 7-inch Leslie Vernon action figure sealed in its DeConte Figures & Collectibles blister packaging, with an alternate burlap head, an extra hand and a hand scythe inside
In the blister pack
The limited-edition mask reproduction with attached hair and head strap, resting on tan fabric
Mask reproduction

From the archives · August 2012

Paradise Lost? Fund It!

Before the return, there was Before the Mask. Our original 2012 Kickstarter didn't reach its goal — but it's part of our story, and its campaign video is a time capsule worth revisiting. Take a trip back with us.

Before the Mask: The Return of Leslie Vernon

$183,046

pledged of $450,000 goal

861

backers

Funding Unsuccessful

The project's funding goal was not reached on Thu, August 9, 2012.

Visit the original campaign
Behind the Mask production slate beside Leslie Vernon's mask — a still from the original 2012 campaign videoWatch original campaign

From the archives · 2010

The first license

Leslie Vernon reached the wardrobe long before the sequel existed. In 2010, Fright-Rags licensed the original film for a sweatshirt and a limited edition poster.

The print shown here is Scott's own copy, signed on the artwork by Robert Englund and Nathan Baesel.

From the archives · 2008 and 2009

Anchor Bay takes it home

Before the anniversary screening and the collector's edition, Anchor Bay Entertainment brought the original film into home video: a DVD on September 30, 2008, after the festival run and initial distribution, then a Blu-ray on December 8, 2009.

Commentaries
The set carries audio commentary tracks with Nathan Baesel, Angela Goethals, Scott Glosserman, and others.
Bonus content
“The Making of Behind the Mask”, “The Casting of Behind the Mask”, deleted and extended scenes, theatrical trailers, and a DVD-ROM screenplay.
Circuit City exclusive
A notable Circuit City release featured a unique opening flap/door packaging and a bonus Hatchet sneak-peek disc.

Take part

What a Vernonite does next

01

Submit the request

Submit a screening request for your town through GATHR®.

02

Spread the word

Tell the horror fans you know that the premiere is happening where they are.

03

Join the kickoff

Come to the November 1 kickoff and hear how the night is being built.

Live fan briefing

The People's Premiere Kickoff

A short live briefing on the People's Premiere and a walk-through of how to submit a screening request through GATHR®.

Sunday, November 1, 2026 · 7:00 PM Eastern · about 30 minutes

Register for the Kickoff

Registration is handled on GATHR®.